gint/include/gint.h

169 lines
3.6 KiB
C

//---
//
// gint core module: interrupt handler
//
// Central point of the library. Controls the interrupt handler and
// defines a few functions to configure callbacks for some interrupts.
//
//---
#ifndef _GINT_H
#define _GINT_H 1
#define GINT_VERSION 0x01000000
#define GINT_VERSION_STR "01.00"
//---
// Interrupt handler control.
//---
/*
gint_getVBR()
Returns the current vbr address.
*/
unsigned int gint_getVBR(void);
/*
gint_systemVBR()
Returns the vbr address used by the system (saved when execution
starts).
*/
unsigned int gint_systemVBR(void);
//---
// Internal API.
// Referenced here for documentation purposes only.
// Do NOT call these functions, you'll most probably screw up the whole
// interrupt handling system.
//---
/*
gint_setVBR()
Sets the vbr address and calls the configuration function while
interrupts are disabled.
*/
void gint_setVBR(unsigned int new_vbr_address, void (*setup)(void));
/*
gint_init()
Initializes gint. Loads the interrupt handler into the memory and sets
the new vbr address.
*/
void gint_init(void);
/*
gint_quit()
Stops gint. Restores the system's configuration and vbr address.
*/
void gint_quit(void);
/*
gint_setup()
Configures interrupt priorities and some parameters to allow gint to
take control of the interrupt flow.
*/
void gint_setup_7705(void);
void gint_setup_7305(void);
/*
gint_stop()
Un-configures the interrupt flow to give back the interrupt control to
the system.
*/
void gint_stop_7705(void);
void gint_stop_7305(void);
//---
// Exception handling.
//---
/*
gint_exc()
Handles exceptions.
*/
void gint_exc(void) __attribute__((section(".gint.exc.entry"),
interrupt_handler));
void gint_exc_7705(void) __attribute__((section(".gint.exc")));
void gint_exc_7305(void) __attribute__((section(".gint.exc")));
/*
gint_tlb()
Handles TLB misses.
*/
void gint_tlb(void) __attribute__((section(".gint.tlb.entry"),
interrupt_handler));
void gint_tlb_7705(void) __attribute__((section(".gint.tlb")));
void gint_tlb_7305(void) __attribute__((section(".gint.tlb")));
/*
gint_int()
Handles interrupts.
*/
void gint_int(void) __attribute__((section(".gint.int.entry"),
interrupt_handler));
void gint_int_7705(void) __attribute__((section(".gint.int")));
void gint_int_7305(void) __attribute__((section(".gint.int")));
//---
// Register access.
//---
/*
enum Register
Represents common registers. Used as identifiers to retrieve their
values using gint_register().
*/
enum Register
{
Register_EXPEVT,
Register_MMUCR,
Register_TEA,
};
/*
gint_register()
Returns the address of a common register. All common registers exist
on both platforms but they may hold different values for the same
information (f.i. EXPEVT may not return the same value for a given
exception on both 7705 and 7305).
*/
volatile void *gint_reg(enum Register reg);
volatile void *gint_reg_7705(enum Register reg);
volatile void *gint_reg_7305(enum Register reg);
/*
gint_strerror()
Returns a string that describe the error set in EXPEVT in case of
general exception of TLB miss exception. This string is platform-
independent.
Some exception codes represent different errors when invoked inside the
general exception handler and the TLB error handler. Parameter 'is_tlb'
should be set to zero for general exception meanings, and anything non-
zero for TLB error meanings.
*/
const char *gint_strerror(int is_tlb);
const char *gint_strerror_7705(int is_tlb);
const char *gint_strerror_7305(int is_tlb);
//---
// Internal platform-independent definitions.
//---
#define GINT_INTP_WDT 4
#define GINT_INTP_RTC 12
#define GINT_INTP_GRAY 15
#define GINT_INTP_KEY 8
#define GINT_INTP_TIMER 10
#endif // _GINT_H